Happy Thanksgiving from Bailiff Enterprises! Our office and plant will be closed Thursday, November 26 and Friday, November 27, 2026. We reopen Monday, November 30.
NaOH storage tanks · outfitted in Willis, TexasMon–Fri · dmiller@plasticstoragetanks.com · 936-228-1520

HDPE · open top · cone bottom

HDPE Open Top Cone Bottom Tanks for Sodium Hydroxide

Open top cone bottom tanks for mixing and batching caustic solutions, with a full-drain bottom outlet.

HDPE Open Top Cone Bottom Tank Prices

7 HDPE open-top cone bottom tanks from 60 to 2,000 gallons, priced from $179 to $2,099. Available in 1.9 SG rating and translucent white.

HDPE Open Top Cone Bottom Tank Prices
2,000 Gallon HDPE Open Top Cone Bottom Tank 1.9 SG 2,000 101" Height x 80" Diameter 8 ft 5 in H × 6 ft 8 in dia. 1.9 Translucent White 440 lbs $2,099.00
1,000 Gallon HDPE Open Top Cone Bottom Tank 1.9 SG Natural 1,000 92" Height x 70" Diameter 7 ft 8 in H × 5 ft 10 in dia. 1.9 Translucent White 275 lbs $1,399.00
800 Gallon HDPE Open Top Cone Bottom Tank 1.9 SG 800 96" Height x 68" Diameter 8 ft H × 5 ft 8 in dia. 1.9 Translucent White 300 lbs $1,699.00
500 Gallon HDPE Open Top Cone Bottom Tank 1.9 SG 500 82" Height x 52" Diameter 6 ft 10 in H × 4 ft 4 in dia. 1.9 Translucent White 160 lbs $649.00
150 Gallon HDPE Open Top Cone Bottom Tank 1.9 SG 150 54" Height x 36" Diameter 4 ft 6 in H × 3 ft dia. 1.9 Translucent White $325.00
100 Gallon HDPE Open Top Cone Bottom Tank 1.9 SG 100 38" Height x 36" Diameter 3 ft 2 in H × 3 ft dia. 1.9 Translucent White 45 lbs $369.00
60 Gallon HDPE Open Top Cone Bottom Tank 1.9 SG 60 27" Height x 36" Diameter 2 ft 3 in H × 3 ft dia. 1.9 Translucent White 32 lbs $179.00

SG (specific gravity) is the heaviest liquid a tank is built to hold. Water is 1.0, so a 1.9 SG tank is made for liquids up to 1.9 times as heavy as water. Choose an SG rating at or above the specific gravity of your liquid.

Why this tank

For Mixing and Batching Caustic

Every tank on this page is rated 1.9 SG or higher and outfitted at our Willis, Texas plant.

◇

Open top access

Easy access for mixers and batching. Keep the tank covered between batches: caustic absorbs carbon dioxide from the air, which weakens it.

!

Diluting releases heat

Adding water to concentrated caustic gives off a lot of heat. Follow your supplier’s dilution procedure and keep the tank’s temperature limit in mind.

SG

1.9 SG and up

50% caustic weighs about 1.53 times as much as water, more than a 1.5 SG tank is rated for, so every tank listed here is rated 1.9 SG or higher.

⌀

Fittings & EPDM gaskets

We install PVC, CPVC or polypropylene fittings with EPDM gaskets. No Viton®, and no aluminum, zinc or galvanized parts. See fittings.

50% caustic at a glance

What to Specify

Weaker blends are lighter and freeze at lower temperatures. Tell us your strength and temperature and we’ll confirm every item before you order.

ItemFor 50% sodium hydroxide
ResinLinear HDPE (rated Good); polypropylene if stored warm
SG rating1.9 SG (50% caustic is about 1.52–1.54)
Freeze protectionInsulation and heat tracing outdoors; hold above about 59°F
GasketsEPDM or Buna-N; no Viton®
FittingsPVC, CPVC or polypropylene; full-size outlets
ContainmentDouble wall tank, or a dike or basin per your fire code

FAQ

Questions

What SG rating do I need for 50% caustic?

50% sodium hydroxide has a specific gravity of about 1.52 to 1.54, so order a 1.9 SG tank. A 1.5 SG tank is rated below the weight of the liquid.

HDPE or polypropylene for sodium hydroxide?

Both work for 50% caustic. HDPE is rated Good and costs less; polypropylene is rated Excellent and is the better choice when caustic is stored warm or heated, up to 200°F continuous.

Can I use a PVDF tank for caustic?

No. PVDF (Kynar®) is rated Not Recommended for sodium hydroxide because strong bases attack it. Use HDPE or polypropylene.

Tell Us Your Caustic Strength

Send the concentration, storage temperature, volume and fittings you need. We’ll match the resin, SG rating, insulation and gaskets and send a quote.