Packages
Four complete setups for the ways sodium hydroxide is actually stored, each built from tanks rated for caustic and outfitted at our Willis, Texas plant.
Start here
Each package is a starting point. We size the tank and adjust the fittings to your strength, temperature, delivery and code, then quote the whole package.
Truck-delivered caustic stored outside, with freeze protection.
See package →2Smaller indoor tanks for cleaning solution and daily use.
See package →3Double wall tanks feeding a metering pump.
See package →4Polypropylene for caustic stored or used hot.
See package →Package 1
For plants that take 50% caustic by tanker and store it outside. The tank is sized to hold a full delivery plus a reserve, and it is insulated and heat traced to keep the caustic above about 59°F.
Typical sizes: 1,500 to 10,000 gallons; use the sizing calculator
Package 2
For food, beverage and dairy plants that make up caustic cleaning solution, and for any process that draws a day’s worth of caustic from bulk storage.
Typical sizes: 50 to 1,000 gallons
Package 3
For water and wastewater plants and process water systems that feed caustic with a metering pump. The double wall tank contains a leak without a separate dike.
Typical sizes: 100 to 2,500 gallons, double wall
Package 4
For caustic that’s stored warm, heated or returned hot from a process. Polypropylene is rated Excellent for 50% caustic and handles continuous use up to 200°F; HDPE is limited to 120°F.
Typical sizes: 25 to 6,000 gallons
Every package uses tanks from our current price lists; the final price depends on size, fittings and options. Ratings for 50% sodium hydroxide are from our compatibility chart. Always follow your chemical supplier’s safety data sheet and your local fire code.
Send the concentration, storage temperature, volume and fittings you need. We’ll match the resin, SG rating, insulation and gaskets and send a quote.