HDPE · horizontal
Low-profile horizontal tanks for caustic soda where height is limited.
10 HDPE single wall horizontal tanks from 325 to 6,025 gallons, priced from $599 to $26,658. Available in 1.9 SG rating and light blue, translucent white and lt blue.
| 6,025 Gallon HDPE Horizontal Leg Tank 1.9 SG | 6,025 | 193" L x 99" W x 103" H 16 ft 1 in L × 8 ft 3 in W × 8 ft 7 in H | 1.9 | Light Blue | $26,658.00 | |
| 5,025 Gallon HDPE Horizontal Leg Tank 1.9 SG | 5,025 | 190" L x 92" W x 96" H 15 ft 10 in L × 7 ft 8 in W × 8 ft H | 1.9 | Light Blue | 1,710 lbs | $17,799.00 |
| 4,035 Gallon HDPE Elliptical Leg Tank 1.9 SG | 4,035 | 192" L x 92" W x 75" H 16 ft L × 7 ft 8 in W × 6 ft 3 in H | 1.9 | Light Blue | 1,385 lbs | $13,278.00 |
| 3,725 Gallon HDPE Horizontal Leg Tank 1.9 SG | 3,725 | 145" L x 92" W x 94" H 12 ft 1 in L × 7 ft 8 in W × 7 ft 10 in H | 1.9 | Translucent White | 1,450 lbs | $11,539.00 |
| 2,635 Gallon HDPE Elliptical Leg Tank 1.9 SG | 2,635 | 140" L x 90" W x 72" H 11 ft 8 in L × 7 ft 6 in W × 6 ft H | 1.9 | Lt Blue | $8,541.00 | |
| 2,035 Gallon HDPE Elliptical Leg Tank 1.9 SG | 2,035 | 142" L x 84" W x 56" H 11 ft 10 in L × 7 ft W × 4 ft 8 in H | 1.9 | Translucent White | $6,012.00 | |
| 1,025 Gallon HDPE Horizontal Leg Tank 1.9 SG | 1,025 | 139" L x 49" W x 54" H 11 ft 7 in L × 4 ft 1 in W × 4 ft 6 in H | 1.9 | Light Blue | $2,885.00 | |
| 725 Gallon HDPE Horizontal Leg Tank 1.9 SG | 725 | 101" L x 49" W x 54" H 8 ft 5 in L × 4 ft 1 in W × 4 ft 6 in H | 1.9 | Light Blue | 230 lbs | $2,264.00 |
| 500 Gallon HDPE Horizontal Leg Tank 1.9 SG | 500 | 72" L x 48" W x 50" H 6 ft L × 4 ft W × 4 ft 2 in H | 1.9 | Translucent White | 160 lbs | $899.00 |
| 325 Gallon HDPE Horizontal Leg Tank 1.9 SG Heavy Duty | 325 | 68" L x 38" W x 40" H 5 ft 8 in L × 3 ft 2 in W × 3 ft 4 in H | 1.9 | Translucent White | 105 lbs | $599.00 |
SG (specific gravity) is the heaviest liquid a tank is built to hold. Water is 1.0, so a 1.9 SG tank is made for liquids up to 1.9 times as heavy as water. Choose an SG rating at or above the specific gravity of your liquid.
Why this tank
Every tank on this page is rated 1.9 SG or higher and outfitted at our Willis, Texas plant.
Horizontal tanks sit low and spread the weight of heavy 50% caustic over a wide footprint.
50% caustic weighs about 1.53 times as much as water, more than a 1.5 SG tank is rated for, so every tank listed here is rated 1.9 SG or higher.
Linear HDPE is rated Good for 50% sodium hydroxide and is the economical choice when caustic is stored near room temperature. See the ratings.
We install PVC, CPVC or polypropylene fittings with EPDM gaskets. No Viton®, and no aluminum, zinc or galvanized parts. See fittings.
50% caustic at a glance
Weaker blends are lighter and freeze at lower temperatures. Tell us your strength and temperature and we’ll confirm every item before you order.
| Item | For 50% sodium hydroxide |
|---|---|
| Resin | Linear HDPE (rated Good); polypropylene if stored warm |
| SG rating | 1.9 SG (50% caustic is about 1.52–1.54) |
| Freeze protection | Insulation and heat tracing outdoors; hold above about 59°F |
| Gaskets | EPDM or Buna-N; no Viton® |
| Fittings | PVC, CPVC or polypropylene; full-size outlets |
| Containment | Double wall tank, or a dike or basin per your fire code |
FAQ
50% sodium hydroxide has a specific gravity of about 1.52 to 1.54, so order a 1.9 SG tank. A 1.5 SG tank is rated below the weight of the liquid.
50% caustic starts to crystallize near 54°F. Outdoors or in an unheated building, choose an insulated tank with heat tracing and keep it above about 59°F.
No. PVDF (Kynar®) is rated Not Recommended for sodium hydroxide because strong bases attack it. Use HDPE or polypropylene.
Send the concentration, storage temperature, volume and fittings you need. We’ll match the resin, SG rating, insulation and gaskets and send a quote.