Fittings · gaskets · options
Fittings, gaskets and options rated for caustic soda, installed at our Willis, Texas plant so your tank arrives ready to plumb in.
Wetted parts
Ratings for 50% sodium hydroxide from our compatibility database. Tell us your strength and temperature and we’ll confirm every part.
| Part | Use | Avoid |
|---|---|---|
| Fittings | PVC, CPVC, polypropylene (Excellent); HDPE (Good) | PVDF (Not Recommended) |
| Gaskets and O-rings | EPDM, Buna-N (Excellent) | Viton® (Not Recommended) |
| Metal hardware | 316 stainless steel, titanium (Good) | Aluminum, zinc, tin, galvanized steel; Hastelloy only after checking (Fair) |
Options
Installed with EPDM gaskets. Size outlets generously: 50% caustic is many times thicker than water and thickens as it cools.
Bring the fill connection down from the top so the truck hose connects at ground level.
Plastic tanks are for atmospheric pressure only. ASTM D 1998 calls for a vent at least as large as the largest fill or withdrawal connection, and never smaller than 1 inch. Go one size larger, and larger still for pneumatic truck unloading.
Spray foam with heat tracing pads and a controller to hold 50% caustic above about 59°F. See insulated tanks.
Reverse float and ultrasonic level indicators so you know when to reorder.
Interstitial leak detectors for double wall tanks, with alarm, strobe and PLC output.
Good practice
Caustic absorbs carbon dioxide from the air, which weakens the solution and can leave a carbonate crust around openings. Keep manways and unused ports capped, and don’t let the weight of pipes or valves hang on a fitting: use flexible connections so the tank can expand and contract.
Send the concentration, storage temperature, volume and fittings you need. We’ll match the resin, SG rating, insulation and gaskets and send a quote.